BZXNT - 907001-907005 ENFORCE LUTING CEMENT - BASE PASTE
- MSDS: BZXNT
- Manufacturer: CAULK DENTSPLY
- Product Name: 907001-907005 ENFORCE LUTING CEMENT - BASE PASTE
- National Stock Number: 6520-00F050310
Product Identification
Product ID:907001-907005 ENFORCE LUTING CEMENT - BASE PASTE
MSDS Date:04/25/1996
FSC:6520
NIIN:00F050310
Kit Part:Y
MSDS Number: BZXNT
Responsible Party
MILFORD, DE 19963-0359
US
Emergency Phone: 302-422-4511
Info Phone: 302-422-4511
Cage: 11107
Contractor
Telephone: 302-422-4511/ 703-451-1900
Cage: 11107
Ingredients
NON-HAZARDOUS INGREDIENTS
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. PERSONS
SENSITIVE TO METHACRYLATE MAY SHOW ALLERGIC CONTACT DERMATITIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, CORNEAL DAMAGE, ALLERGIC RESPONSES.
Medical Cond Aggravated by Exposure:OPEN SORES & WOUNDS OF THE SKIN.
SENSITIVITY TO METHACRYLATE.
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: FLUSH W/WATER FOR 15
MINS, THEN WASH W/MILD SOAP & WATER. OBTAIN MEDICAL ATTENTION IN
ALL CASES.
Fire Fighting
Extinguishing Media:CO2, DRY CHEMICAL/HALON.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING & SCBA.
Unusual Fire/Explosion Hazard:DURING A FIRE, IRRITATING GASES FROM THE
DECOMPOSITION MAY BE PRESENT.
Accidental Release
Spill Release Procedures:SPREAD VERMICULITE ON PASTE TO ABSORB ANY
RESIN. SCOOP UP & PLACE IN AN APPROPRIATE MARKED CONTAINER.
Handling
Handling and Storage Precautions:STORE AWAY FROM FOOD & BEVERAGES &
AWAY FROM EXTREME HEAT. OBSERVE NORMAL WAREHOUSE HANDLING
PROCEDURES.
Exposure Controls
Respiratory Protection:NONE REQUIRED DURING NORMAL USE OF THIS PRODUCT.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:RUBBER
Eye Protection:PROTECTIVE GOGGLES
Other Protective Equipment:RUBBER APRON.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.8
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY OFF-WHITE TO YELLOW PASTE W/SWEET ACRYLIC
ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
PEROXIDES
Stability Condition to Avoid:HEAT >122F.
Conditions to Avoid Polymerization:HEAT >122F.
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.